Product Features:
- Company to use high thermal conductivity epoxy resin to produce alloy resistors
- Laser engraving fonts, more environmentally friendly, more refined appearance
- Alloy chips, sealing process, good welding performance, high reliability, high overload capacity
- Good product consistency, high precision, good reliability and stability
- Low resistance temperature coefficient, ultra-low parasitic inductance, used for high-frequency AC current detection.
- Comply with ROHS requirements and halogen-free requirements, and meet automotive regulations
- AEC Q200 complied
- Stable Encapsulated Resistor/ Surface Mount Chip Resistors
Product Usage Recommendations：
- During product use, pay attention to surface protection to prevent defects such as bumps and scratches on the product surface.
- When installing and using the product, avoid mechanical stress on the product.
- The long-term power of the product should be less than or equal to the rated power to avoid resistance drift caused by long-term overload.
- When using the product under high temperature or poor heat dissipation conditions, refer to the power consumption reduction curve for derating application.
- Stable Encapsulated Resistor/ Surface Mount Chip Resistors
Stable Encapsulated Resistor/ Surface Mount Chip Resistors support customizeSupport customize resistance and TCR. Welcome to contact us for more solutions.
| Package |
Power |
Resistance (min) |
Resistance (max) |
Tolerance |
TCR (ppm/℃) |
| 2817 |
5W |
1 mΩ |
100 mΩ |
±0.1% ~±5% |
±25ppm~±50 ppm |
| 3637 |
5W |
0.2 mΩ |
10 mΩ |
±0.1% ~±5% |
±25ppm~±100 ppm |
| 4527 |
7W |
0.5 mΩ |
100 mΩ |
±0.1% ~±5% |
±25ppm~±75 ppm |
| 2728 |
4W |
4 mΩ |
75 mΩ |
±0.1% ~±5% |
±25ppm~±50 ppm |
| 2725 |
4W |
0.2 mΩ |
3 mΩ |
±0.1% ~±5% |
±25ppm~±50 ppm |
| 2512 |
4W |
0 mΩ |
100 mΩ |
±0.5% ~±5% |
/ |
| 3.5W |
0.5mΩ |
1 mΩ |
±0.1% ~±5% |
±150ppm |
| 3W |
1 mΩ |
10 mΩ |
±0.1% ~±5% |
±25ppm~±50 ppm |
